LIQUID SOAP SOLUTION
Here's a revised guide on the process of making liquid soap using methanol, texapon, catalyst, and other chemicals ⚗️:
Note: This process requires proper safety equipment, ventilation, and handling of chemicals π¨. It's recommended to consult with a professional or follow established safety protocols π.
Ingredients:
- Methanol (CH3OH) ⚗️
- Texapon (Sodium Lauryl Ether Sulfate) π§
- Catalyst (Sodium Hydroxide, NaOH) ⚗️
- Distilled water π§
- Glycerin π¦
- pH adjuster (Citric acid or Sodium hydroxide) ⚗️
- Fragrance (optional) π
- Colorant (optional) π¨
Instructions:
1. Safety precautions: Wear protective gear, including gloves π§€, goggles πΆ️, and a face mask π. Ensure proper ventilation and a well-ventilated workspace π¨.
2. Mixing the catalyst: In a separate container, mix the sodium hydroxide (NaOH) with distilled water to create a catalyst solution ⚗️.
3. Mixing the methanol and texapon: In a large mixing tank, combine the methanol and texapon π§. Heat the mixture to around 50°C (122°F) to facilitate dissolution ♨️.
4. Adding the catalyst: Slowly add the catalyst solution to the methanol-texapon mixture while stirring π.
5. Reaction and neutralization:Continue stirring and heating the mixture until the reaction is complete (usually indicated by a pH change) ⚗️. Neutralize the mixture by adding a pH adjuster (citric acid or sodium hydroxide) ⚗️.
6. Adding glycerin and water:Mix in the glycerin and distilled water to achieve the desired consistency and pH level π§.
7. Fragrance and colorant:If desired, add fragrance and colorant to the mixture and stir well π¨.
8. Filtering and filling:Filter the liquid soap mixture into clean, sterilized containers π§Ή.
9. Quality control:Perform quality control checks, including pH testing, viscosity measurement, and visual inspection π.
Remember to follow proper safety protocols and handling procedures when working with chemicals π¨. If you're new to soap making, it's recommended to consult with a professional or seek guidance from an experienced soap maker π.


Comments
Post a Comment