SHAMPOO MAKING PROCEDURE
Here's a guide for making shampoo:
Ingredients:
- 1 cup distilled water 💧
- 1/2 cup shampoo base or sulfates 🧖
- 1/4 cup coconut oil or other moisturizing oil 🥥
- 2 tablespoons olive oil or other nourishing oil 💦
- 2 teaspoons vitamin E oil or other antioxidant 💊
- 1 teaspoon fragrance oil or essential oil (optional) 🎂
- 1 teaspoon preservative (optional) 🚫
- pH adjuster (citric acid or sodium hydroxide) ⚗️
Instructions:
1. Mix distilled water and shampoo base: Combine distilled water and shampoo base in a bowl 🍲.
2. Add coconut oil and olive oil: Mix in coconut oil and olive oil until well combined 🌿.
3. Add vitamin E oil and fragrance oil (if using): Stir in vitamin E oil and fragrance oil (if using) 🌸.
4. Heat the mixture (optional): If using a preservative, heat the mixture to around 40°C (104°F) to facilitate dissolution ♨️.
5. Add preservative (if using): Stir in preservative (if using) 🚫.
6. Adjust pH: Use a pH adjuster (citric acid or sodium hydroxide) to adjust the pH of the shampoo to around 5.5 ⚗️.
7. Filter and fill: Filter the shampoo into clean, sterilized bottles 🧹.
8. Quality control: Perform quality control checks, including pH testing, viscosity measurement, and visual inspection 🔍.
Safety Precautions:
- Wear protective gear, including gloves 🧤, goggles 🕶️, and a face mask 🎭.
- Ensure proper ventilation and a well-ventilated workspace 💨.
- Follow established safety protocols and handling procedures for chemicals 🚨.
Alternative Recipe (Using Methanol, Texapon, and Catalyst):
- 1 cup methanol ⚗️
- 1/2 cup texapon 🧖
- 1/4 cup distilled water 💧
- 1 tablespoon catalyst (sodium hydroxide) ⚗️
- 1 teaspoon glycerin 💦
- 1 teaspoon fragrance oil (optional) 🎂
- pH adjuster (citric acid or sodium hydroxide) ⚗️
Instructions for Alternative Recipe:
1. Mix methanol and texapon: Combine methanol and texapon in a bowl 🍲.
2. Add distilled water and catalyst: Mix in distilled water and catalyst (sodium hydroxide) 🌿.
3. Heat the mixture: Heat the mixture to around 50°C (122°F) to facilitate dissolution ♨️.
4. Add glycerin and fragrance oil (if using): Stir in glycerin and fragrance oil (if using) 🌸.
5. Adjust pH: Use a pH adjuster (citric acid or sodium hydroxide) to adjust the pH of the shampoo to around 5.5 ⚗️.
6. Filter and fill: Filter the shampoo into clean, sterilized bottles 🧹.
7. _Quality control_: Perform quality control checks, including pH testing, viscosity measurement, and visual inspection 🔍.
Remember to handle chemicals with care, wear protective gear, and follow established safety protocols 🚨. If you're new to formulating shampoo, consider consulting with a professional or seeking guidance from an experienced formulator 📚.

Comments
Post a Comment